Penguin Cold Therapy Chiller (Made in the USA)

Chiller includes:

1. 3/4HP Cold Therapy Chiller with built in pump – outdoor rated!
2. 2qty quick connect fittings to mate with fittings on the back of the chiller, fittings have 3/4″ barbs for connecting 3/4″ ID tubing to the chiller (tubing sold separately)
3. Inline Screen – coarse filter to catch hair and large debris prior to chiller 

Whether you are new to cold therapy or a seasoned pro, you are likely doing it for the benefits that exposure to cold offers rather than the physical workout you’ll get from lugging all the ice needed to keep up with it.  Lets face it – keeping up with the amount of ice needed to keep a ice bath cold can get to be quite the burden.  Our chiller will keep your ice bath cold effortlessly, this should lead to more consistent and frequent usage.    Make the most out of your ice bath by turning it into an iceless bath!

The chiller can reach into the low 40F’s, even down into high 30F’s with the right conditions.  Ambient temps and sun exposure account for the majority of the heat load on a cold therapy tub (your body heat is insignificant  compared to the sun).  Reducing the external heat load will improve chiller performance.  Low to mid 40F’s should be possible on a most +/-100 gallons setup even in full sun / less than ideal conditions. Our cold therapy chillers can be used indoors and outdoors, except in freezing conditions

We do not recommend putting the chiller in an area that cannot get wet as the chiller, along with the tubing, will produce condensation.

- Monthly operating cost: Approximately $15-$25 at $0.12/KWh.

- Compressor and fan activate only when cooling is needed; they shut off once the water hits the set temperature, leaving only the low wattage pump running.

Benefits of continuous operation:

- Cold water inhibits bacteria growth, reducing slimy walls and maintenance needs.

- Maintains water cleanliness longer, requiring less frequent changes and minimal sanitizer use (chlorine/hydrogen peroxide, etc.).

- Regular use negates significant power savings; any heat gain during "off" periods needs removal upon restart, potentially saving only $1-$3/month but increasing water and filter change frequency.

- Power cycling adds wear to the pump, the most vulnerable at startup, thereby potentially reducing its lifespan.

• 3/4HP High Efficiency Chiller
• 56 dBA (fairly quiet)
• 110 – 120 Volts / 450 Watts / 3.9 Amps
• 14”W x 20”D x 12”H
• 52 Pounds
• Built in Pump
• 10′ power cord with GFCI protection
• Rain Proof* (*disconnect chiller and drain completely when ambient temps are freezing or below to prevent damage to chiller)
• 1 Year Product Warranty
• Proudly made in the USA